[labyl]

Don't be panic if you suffer from data loss on USB Flash drive by accidental deletion, virus attack, formatting, or other reasons. Bitwar Data Recovery software enables you to restore lost data on USB flash drive simply. Now follow this page to get back your missing data on USB Flash Drive.

When we talk about USB drive, you may feel familiar with the following types: USB flash drive, USB pen drive, USB external hard drive, etc.
A USB drive is portable for users to read, write, transfer, and save data. However, due to improper operations and other accidents, data loss on a USB Flash Drive seems unavoidable. Is there any way to retrieve lost files from USB Flash Drive or any other storage devices?

Here you can follow the two reliable methods that listed in this article to restore data from your USB flash drive:
Solution 1: Recover Data from USB Flash Drive with Bitwar Data Recovery

Finding a reliable USB Flash Drive data recovery software is the wisest and quick choice. Bitwar Data Recovery software enables you to restore all files from your USB Flash Drive owing to accident deletion, formatting, virus infection, USB damage, etc. The best data recovery tool can get back your losing data in various situations.

Download the secure and free software right now. Then follow the detailed steps below to do the USB file recovery with only a few simple clicks.

Step 1. Download the free data recovery software from its official website: https://www.bitwar.net or clicking the download button.


Step 2. Launch the freeware and make sure that your USB Flash Drive is well connected to your PC.



Step 3. On the "Standard Mode" interface, you can see six different recovery modes. Each of them focuses on different devices. Select "External Devices Recovery" to do the USB Flash Drive Recovery. You can also choose other patterns if you want to recover data that caused by other reasons.


Step 4. Select the types of data you want to retrieve. If the file of type contains is more than one, you can click on "Select All Types." Then hit "Next" to start scanning.

Step 5. When the scan is done, you can preview the scanned data and click the "Recover" button to keep them.

Tip: You should restore the data on a different partition or other external hard drives. Otherwise, your data may be overwritten and more data will be lost.
Solution 2: Perform USB Flash Drive recovery with CMD

Using CMD to perform the USB Flash Drive recovery is only workable when the files are hidden on your drive. If the files are deleted, formatted, or lost due to other reasons, you should apply the Bitwar Data Recovery to help you get back the missing data. Here are the ways to perform CMD Command:


1. Connect your USB Flash Drive to your PC.

2. Run Command Prompt as an administrator.

3. Type Attrib -h -r -s /s /d G:\*.* and hit "Enter."


After doing so, the hidden files on your USB will appear again.